Dyson WashG1™ wet cleaner is Dyson’s first dedicated wet floor mop for hard floors, picking up both wet and dry debris.

Dyson WashG1™ wet cleaner has counter-rotating motorised rollers – instead of vacuum suction – to separate large debris from liquids. Vacuum motors may also expel air back into the room which could cause odours. It also has a unique separation system where secondary brush bars with nylon bristles remove large debris and hair from the rollers – while extraction plates squeeze off moisture. Debris collects in a removable tray, and waste liquid is pumped into a separate Dirty water tank.

Dyson WashG1™ wet cleaner has 3 modes (levels 1, 2 and 3), plus a MAX setting. Levels 1 and 2 are for dry dust, hair and fibre and low viscosity spillages. Level 3 is for dry debris and high viscosity spillages. MAX setting is for stubborn dirt. You can switch between modes using the silver button. For MAX setting hold down the blue button. Level 1 is recommended for everyday quick cleans and on delicate flooring.

Dyson WashG1™ wet cleaner picks up and separates both wet and dry debris, and hair - vacuuming is not necessary prior to use on hard floors.

Dyson WashG1™ always uses hydration when cleaning, if you want to dry vacuum only we recommend the use of one of our Dyson Cordless stick vacuums. You will need a vacuum cleaner for your carpets, upholstery, mattresses, pet beds, countertops, and inside your car.

This hard floor cleaner has the capacity to clean everything from fine dust, small debris and hair, to splashes and spillages, all the way to heavier liquid substances such as ketchup, syrup and oil mist – even stubborn stains such as dried food and toothpaste.

The Clean water tank has a 1 litre capacity whilst the Dirty water tank has a 0.8 litre capacity.

Up to 290sqm, based on Dyson internal calculation with no repeated cleaning on the same area, with 0.5m/s speed. Actual area coverage may vary depending on habits and floor types. We recommend using hydration level 1 to achieve maximum floor coverage on a single fill.

The Dyson WashG1™ wet cleaner doesn’t need to be cleaned manually after every clean. Instead, we recommend using the floor mop’s Self-clean function after each use. We also recommend cleaning the Dyson WashG1™ wet cleaner manually after every three uses.

Place the machine on the dock after each clean, to store and charge, ready for next time.

The Dyson WashG1™ wet cleaner is our first dedicated wet floor cleaner, engineered to wash hard floors with up to 290sqm coverage on a single tank.¹ The Dyson V15s Detect Submarine™ wet and dry vacuum is Dyson’s multifunctional vacuum cleaner which includes a precision-engineered wet roller head with up to 110sqm coverage, dust illumination and anti-tangle technologies.

Turn the machine on and off via the red power button underneath the UI screen.

No, Dyson WashG1™ wet cleaner is Dyson’s first dedicated wet floor cleaner for hard floors, picking up both wet and dry debris.

Apart from the charging dock, the Dyson WashG1™ wet cleaner has everything you need onboard. No additional accessories.

No, this machine is engineered as a hard floor cleaner only.

When using floor cleaning solutions, do use gentle, low-foaming common household detergents and do not use bleach. Be sure to follow the solution’s specific direction for dilution - with a 1L clean water tank you shouldn't require any more than 1Tbsp of solution. We also recommend adding the solution after filling the clean water tank.